Here is procedure that how to upgrade firmware/software of your receiver.
1. Get a USB Pen Drive format with FAT32.
2. Load the File.abs onto it.
3. Place the Pen Drive at the back of the box via USB port.
4. Follow the below procedure to upgrade the firmware via USB.
Menu -> Tools -> Upgrade By USB -> OK
To Check the Firmware Version
Menu -> Tools -> Information -> OK
Note: Firmware will load and the Box will reboot (DO NOT TURN OFF THE BOX WHILE UPGRADING FIRMWARE) and please note if you have clone Box then you box may be crash or dead. But don't worry we have also solution for Dead or Clone Box.
Please Click here if you have Dead openbox